The classification sand mills, we will normally divided into horizontal and vertical  type. In fact, we literally can simply see the difference between the two word. Horizontal mill  is to cross over the vertical machine horizontally only. Then due to the influence of gravity to manufacture different materials, resulting in a lot of different. Its different effects, we will be summarized in the following content.
Ceramic bead mill - Horizontal
Fineness of grinding
On the fineness of grind of this factor, the fineness of the material with a high vertical sand mill will take a long time, and may not be able to achieve the fineness required, so the requirements under the requirements of the grinding fineness, horizontal grind more appropriate opportunity. Because the grinding media distribution, high fill rate, so it can grind fineness of 10 microns or less product, the lowest up to 1 micron.
Quality timber
Vertical machine is mainly for low demand high capacity products, so the price is cheap, thus causing manufacturers generally are relatively common material selection; and horizontal sand mill because many of them are targeted at high-end products, so horizontal machine is better than vertical.
The use of cost
We believe the cost is one of the factors we are most concerned about, vertical bead mill sealed by avoiding the problem areas, it is easier in the manufacturing, construction costs will be lower. Therefore, vertical machines, more suitable for some of the products require relatively low, but the need for high-volume manufacturing, while horizontal sand mill opposite.